Author Archives: John Ferguson

Peekamoose Options

Last week, a reader asked me for advice on a killer route that would take him over several of the major climbs in the area, starting from New Paltz. He didn’t ask me to create GPS for him, in fact, he already had a good route in mind, but because I have an obsession with maps, I put together three options for Peekamoose.

First, a warning: These routes will challenge even experienced riders. Two of them include three of the finest climbs in the Catskills and Shawangunk Ridge, and one includes an additional climb which is well worth your time. If you’re an experienced rider looking for a capstone ride for your summer, one of these will fit the bill nicely, particularly if you want something in the century range.

Second, I obviously took these pictures at different seasons, and across several years. So think green!

Let’s get this party started by getting you from the train station in Poughkeepsie to the starting point in New Paltz. Don’t consider this part of your ride—it’s extremely fast with minimal effort, and it takes you on a bike path out of Poughkeepsie to Route 299.

Poughkeepsie Bike Path

There is considerable traffic on Route 299, but the shoulder is wide, so it is safe. Is it the prettiest way to get to New Paltz? No, but it’s the fastest way to get to the good stuff. This is what the route looks like, and the GPS can be found here. Don’t be scared by the elevation gain, it’s just because there’s a bridge on the route.

Getting 2 New Paltz

Here’s option 1. The route, excluding the transport segment to and from New Paltz, is 105 miles. You’ll begin in New Paltz by crossing the river and taking an immediate right on Mountain Rest Road. You can also go straight on 299, but this little jog to the northwest keeps you away from traffic a little longer.

55 Field

Once you rejoin 299, you’ll head down to a hairpin turn which leads into the climb over the ridge on Route 55. At the base of the climb, you’ll see a German restaurant; across the street there’s a place to fill your bottles or get supplies, if needed.

Base of 55 climb

Then, it’s all uphill for the next 5 miles. You’ll encounter some traffic on the way up—everyone is headed to the parking lot at the top of the ridge. Once you pass that parking lot, the traffic tapers off dramatically and you get to experience a fun 6-mile descent into Kerhonkson.

55 Decent

You can either continue onto 209, where there is a convenience store (take a left to rejoin the route), or—as shown on the route—you can take a left on Berme Road, which is considerably more pleasant than 209. Then, it’s on to a very short segment on 209 to take you to Lundy Road. Here, you’ll pass a nice swimming hole if you need to cool off, followed by a right on lovely Rogue Harbor Road. Lundy is extremely rough, and Rogue Harbor is outright gravel. I ride both regularly on a road bike with 25 mm tubulars, so you’ll survive, I’m sure.

Lundy and Rogue_pe

Now we’re getting to the good part: the foothills of the Catskills. Cherrytown Road is lovely, and you’re going to hit some great gravel on Dug and Sundale Roads.

Day 2 3

After that, you’ll pass by my house and head into the Catskills.

Day 1 6

I have to warn you that although the whole section I just described is absolutely beautiful, it’s a long hard slog up a moderate incline. Trust me—I have to do it every time I ride into town!

Shortly thereafter, you’ll hit High Point Mountain Road, which will lead you to the second big climb of the day—Peekamoose! It’s a good climb to the top with transient 16% grades, but it is worth it. And here’s the bonus: An 8-mile continuous descent. That’s right, absolutely no uphill—all downhill.

12. Peekamoose

Now, this route includes a second climb up starting on Red Bush/Greenville Road. You need to ride this even at the cost of all the additional effort. You’ll get this wonderful view:

14. At the top of Peekamoose

Followed by a 13 mile descent with lots of gravel.

16. Mill Road

From there, you’ll follow 55 into Naponach, followed by another brief segment on 209, whereupon you’ll enter Ellenville. Stop for lunch because the worst (and best) is ahead.

19. 55 Going into Naponach

From Ellenville, you’ll take South Gulley Road back over the Shawangunk Ridge. Here’s a view looking down South Gulley in the winter. You’ll be going up, sorry!

6 the Valley

It’s apparently the biggest vertical climb in the Southern Hudson Valley. Afterward, you’ll descend on Vista Maria, and from there it’s all rolling farmland and forest back to New Paltz.

As you can tell, I endorse Route Number 1. But here are a few more options.

Route 2 will take you much the same way, but it is only 90 miles in length. On this route, you won’t climb over the ridge on 55; instead, you’ll take Mountain Rest Road over the ridge. In many ways, this is a better climb than 55, and there is much less traffic, but no views! So for all that struggle you get nothin’ at the top. From there, you’ll head into High Falls, and then up into the foothills…no, there’s no avoiding the slog up to the first climb, but again if you have to struggle you might as well do it in beautiful country, right?

Option 2

You’ll go over Peekamoose, same as before, but instead of enjoying the second climb, you’ll head straight down onto 55, and then ride in back country to Ellenville. I’ve included a descent on Irish Cape Road just because it’s fun, but it does mean that you have to ride 2 miles on 209 to get back to Ellenville. Do it though, it’s worth it. From there, everything is materially the same.

Now, what about Route 3?  This ~90-mile route takes you halfway up the Route 55 climb, but then takes Clove Road over, and you ultimately cross 209 to get to the foothills. This route includes the second Red Bush/Greenville climb and all the fun gravel. Again, after you hit Ellenville, you’ll be riding up South Gulley, descending Vista Maria, and then rolling farmland back to New Paltz.

Option 3

I’ve covered every inch of these roads on various rides, and you really can’t go wrong with any of them. They will tax even the most experienced rider, but nearly every mile is worth the effort. I say nearly, because there are some very short segments on 209 (which really is much better than 9W, but it is the least pleasant road out here). Altogether, though, out of 90 to 100 miles less than 4 or 5 are on 209.

If you need any advice (or encouragement) my contact information is on my professional website…and check back a little later in the week: I’m putting together the Spring Route Roundup right now, and of course I’ll have a ride report for you.

John

Medicalwriter.net

This Week: A Preview

Not enough time to write a proper post, but I did get out for a 30-mile ride today. First time on the English this year. I forgot what it’s like to ride something tailored especially for me. It really is a perfect bike for my needs. I put the squealing creaky Lynskey in the basement (after removing all key components and greasing where necessary). It still has a creak despite all the work I did and a visit to the bike shop. I’ll deal with it in the fall. This was the first ride I’ve done this year that did not involve some degree of suffering due to weather.

The weather was perfect, the bike was perfect, and the ride was perfect. Looking forward to many more days of this now that the weather is improving and I’m back on the English.

So…I have plans for this week. My friend Guy is coming out on Thursday, and I’m going to take him on a ride over Peekamoose, Greenville Road, and other exciting climbs. Pictures to follow (no HDR…I’ve given up, I can take constructive criticism!)

I have plans for two posts. The first came about because Mike K asked me for advice on routes; I put together three killer routes for him that included Mountain Rest Road, Peekamoose, and South Gully Road. It sounds like he didn’t follow any of the three precisely, but hit most of the key roads anyway. Since I developed the routes I might as well publish them. Second, I’m going to write a spring route review to help guide people to the appropriate posts with good routes. Yes, you can do it by clicking on the Worth the Trip tag, but there’s also a lot of other stuff in there, and I want to write consolidated guidance.

Finally, this blog has no commercial or really any personal objectives; instead, it is intended to get people out here and riding on what are arguably some of the best and most scenic roads on the east coast (and only 1.5 hours from NYC by train, no less!) So do me a favor: If you use any of these routes, or even if you’ve used this blog as guidance for designing your own, send me a few good pictures, a few lines about your ride, and–if you designed your own route–the course. I’ll put it up on the blog. It’s nice to know that you’re doing something useful, and you’ll be helping everyone else out who follows you.

Have a great week!

John

medicalwriter.net

Mack Superlight Hubs

For my Lynskey.

They’re going to be built using Chinese carbon rims. They appear red here, but they are the brightest pink imaginable. The front hub weighs 83 grams; the rear 199 grams. Not bad for disc hubs!

They can be ordered from Mack Hubs, which is based on Poland. Of course, I haven’t built them into wheels yet, so I can’t comment on quality or durability.

Image

John

medicalwriter.net

Pleasing the Internets

I admit it: I like looking at pictures of bikes, I like talking about bikes, and I especially like riding bikes. Other than working, riding is the thing I do most. I don’t like working on my bikes, and when I do it, it is usually accompanied by paranoia that I’ve done something wrong and (for example) that I am going to die when my carbon fiber steerer cracks because I tightened the stem bolts without a torque wrench.

Anyway: you have to please your fellow bike obsessives, particularly those on the internet. The only way to do that is to post a picture of your bike with proper pro fit. Meaning stem slammed (or nearly so), at least 12 cm long, and plenty of drop.

Ladies and gentlemen, I bring you the semi-pro fit Lynskey. Semi-pro because my stem isn’t long enough, the sternum puncher is uncut, and I just realized that I may have the bars rotated too far up.

7

Seriously now: those of you who know me know that I suffered a serious neck injury in 2008. There were times since then where I couldn’t bend my neck back at all without my hands going numb.  It was bad enough that I rode a recumbent for over a year. A low racer. In downtown Manhattan. That’s bad.

The injury required an upright, inefficient position on conventional bikes. It was frustrating because I am otherwise flexible, but the mechanical problem with my neck prevented me from assuming a more conventional position for someone who is otherwise a fit, experienced cyclist.

Well, it seems that my neck has finally healed, so I’ve been playing with my fit. I started with the most extreme position, with the intention of working back from there. But you know what? It works great: No neck pain, and riding seems easier/more efficient in this position.

I suspected this would be the case because I’ve been riding mostly in the drops for the last six months. I have a longer stem in the mail (and a torque wrench!), and once I get stem length sorted out I’ll cut the steerer.

In other news, I rode the non-boring boring loop 5 days straight, so I rewarded myself with a casual ride to Subway for a sub. Yes, Subway. Jared was haunting my dreams…

Subway-Jared

…and sometimes you just have to do it, right? That’s 120 miles in the last 6 days—pretty bad compared with this time last year, but last year we were nearly in summer in late March.

This was my route:

route-map-full

Here are some pictures. Click on the first one for full size, it’s pretty cool. That cliff you see in the center of the first picture is called Gertrude’s Nose, and that’s the Shawangunk Ridge. According to my local fact checker, John S, this picture actually shows Sky Top (with the tower) and Eagle Cliff to the right. Gertrude’s Nose is 5 miles to the Southwest.

11

12

8d

6

5

4

2

I also had my first cyclist sighting this year (aside from the people I ride with). He was headed north on 213, and took a left on 209. Anyone I know?

John

medicalwriter.net

Gravel Training Loop

I’m going to admit something: fitness and speed are really secondary objectives for me. I mostly ride to go interesting places under my own power, get outside, and take a few pictures. I don’t race, and I don’t want to. Not because I lack competitive drive, I just don’t want to be responsible for crashing other people out of the race.

I’m trying to get over my mindset that any ride of less than 50 miles is a waste of time. Frankly, my longer rides really don’t build fitness, they’re mostly for exploration and to satisfy my curiosity.  It’s nice that I am in, by all accounts, extraordinary shape because of cycling, but it’s really just a side effect of my curiosity.

That said, speed and fitness are essential for getting where I want to go, particularly out here where 100 feet/mile of climbing is the norm. So I designed this, and I’ve been riding it daily for the last four days. I’m trying to bore myself into focusing on exercising, rather than being continuously distracted by my surroundings.

20 mile training

Twenty miles, 2100 feet of climbing, lots of gravel! It’s the least boring boring loop I could design. I decided to document it today, since it was day 4 of riding the loop and I was taking it a bit easier to recover. Some pictures for you:

9

8d

7d

6

5

4

It’s still quite cold out here, as you can tell by the pictures. I’m really tired of riding in the cold, so I’m keeping my rides <30 miles for the next week or two. Hopefully I’ll make up for that by getting out every day, though. Soon I hope to get back to exploration and route finding. Click on “Worth the Trip” to the right if you’re just here for the 50-100 mile routes.

John

medicalwriter.net

A Near Death Experience

A few weeks ago, I read a news report about a father and two sons who went out hiking and subsequently froze in 20-degree weather. A tragedy, to be sure, but I was curious how it’s possible to die of exposure in the 20s–after all, we regularly spend 12, 14, even 16 hours outside in that sort of weather with no problems.

Well, now I know…

I set out on a planned 40-mile ride. It was snowing lightly, but still above freezing at the start.

2

Then the snow turned into a sloppy, wet, nasty mess.

3

6

Which ended up soaking my gloves. And then the temperature dropped well below freezing, the wind kicked up, and the last 10 miles of my route was mostly descending.

7

I seriously thought I was suffering from frostbite. When I touched the ends of my fingers, I could hear a crackling noise–they were frozen. I spent the last 10 miles of the ride stopping every mile, unzipping my jacket and jersey, and warming my fingers by putting my hands under my arms. Two fingertips still hurt, so I must have gotten some mild frostbite.

I think I might have been better off with wool gloves, instead of the synthetic gloves I was wearing. Wool continues to insulate even when wet, apparently, but the Assos gloves I was wearing–which are ordinarily too warm even at 35 degrees–lost all insulating characteristics after getting wet.

That’s all I have to report right now. My wrist is getter, and I got in 110 miles of riding this week as it was healing. Now, however, we’ve had another 8-12 inches of snow dropped on us. Soon, very soon I will be able to get out for real rides–meaning at the very least 50 miles.

Oh, and one more thing: Thank you to everyone who has sent me e-mails about the blog, it’s very encouraging. Given that the blog is getting 150-200 views per day, I expect to see a lot more people riding up here next year. Most of my routes pass by my place at some point, so if you get chased by a giant black Cane Corso or Rhodesian Ridgeback, don’t worry, they don’t bite.

If you have any questions or requests, my contact information can be found via the about page. And again, if you’re just looking for routes, click on “Worth the Trip” in the categories to the right, or just go to my Ride With GPS page.

John

medicalwriter.net

A Review of Kettle Cycles SFL SiCCC Rotors: First Rides

I installed Kettle Cycle’s SFL SiCCC carbon-fiber rotors on my cross bike yesterday, or actually I should say my bike shop installed them because I don’t have a torque wrench. I was among the first to get them because I supported their Kickstarter.

2

As I was leaving the bike shop, I tried to brake and found that they had little or no braking power. I rode to the gas station next door and followed the bedding-in procedure in their parking lot, which is basically just accelerating to jogging speed and braking to a stop 10-15 times. After that they seemed to brake as well as the stock steel rotors I had on previously.

3

I didn’t buy these to be a weight weenie, even though they are very substantially lighter than the rotors I had on there before. I bought them because I hoped that they would solve the screeching brake problem I was having with the stock steel rotors, particularly when they got wet. It was raining heavily on the way home from the shop, and I’m happy to say that there wasn’t even a trace of screeching. Instead, there is sort of a quiet sanding noise that you can only hear if you’re really listening to it. It does make me question what is happening to my brake pads, though. The braking was fine even on 12% to 15% descents.

1

I don’t know how long they will last, of course, but after two days of riding and about 50 miles, I’m pleased. Let me repeat this, though, in case it wasn’t clear: you must follow the bedding in procedure or you will die. It’s simple: accelerate to maybe 10 mph, then slow down. Repeat 10-15 times somewhere where you won’t crash into something. You’ll notice the braking power become considerably better from the beginning to the end of this process. Once you’re done, you get about 80% of the braking power you’ll get with a steel rotor. After another 10 or 20 normal brakes and you won’t be able to tell the difference. I don’t know if that is because the rotors are approaching the braking power of steel rotors or if I just adapted. But the end result is the same.

Addendum: I am using Swiss Stop pads, and I installed a fresh set when switching rotors.

John

medicalwriter.net

Let the Fun Begin!

Or not.

I haven’t let my wrist fracture slow me down at all. In fact, I’ve been out for rides the last three days. I found that if I support myself by putting my right hand on the tops, and rest my left gently on the hoods, riding is tolerable as long as I’m careful not to hit any big bumps. Using this methodology, I’ve managed to ride ~80 miles over the last 3 days.

This is Brown Road, very close to home. I just took this picture because the dead plants in the swamp remind me of an alien from the original Dr. Who series.

1

On Monday, I decided to figure out what lies at Trail’s End. Although I am opposed to out-and-back routes or roads that dead end, I mapped this road on Ride with GPS and found that it includes a pretty decent climb with 15% grades. I was also curious to see how far back into Catskill Park I could get…perhaps this could be a shortcut to Yeagerville Road?

2

Unfortunately, when I got to the top of the road, I saw it continued on icy gravel. Normally, that wouldn’t stop me, but I really did not want to fall on my hand again. So I’ll save this discovery for a little later in the year.

3

On the way home, I took a new route on Kelder Highway, which is actually a narrow 2-lane road. I’ve ridden past it dozens of times, but for some reason it never occurred to me to take it. Nice views.

4

Again, close to home. The road to the right, DeWitt, is some beautiful nicely groomed gravel. The road to the left is Brown Road, which leads back to my place.

5

This is, I believe, Mill Road. As you can see, it was a wet n’ muddy ride to say the least. I’ve said this before, but I actually really enjoy riding in a nice cold rain, perhaps even more than a riding on a perfect 65-degree day.

6

The rains led to significant flooding. This waterfall along the side of the Vly road is usually barely a trickle; in fact, I hadn’t noticed it previously, even though I go this way all the time.

7

I installed some SiCCC rotors on the winter bike (after taking this picture, obviously). I’ll have an initial review for you tomorrow.

10

I did a lot of gravel grinding over the past few days, resulting in a lot of laundry. This is Kozon Road, which leads up to Ricci Road, which in turn leads to Lower Sahler Mill Road.

13

12

If you’re planning a route in the area and want to have a good time, try to include Lower Sahler Mill Road, starting from County Road 2. It’s the most fun you can have on two wheels. It starts with a gentle descent for about 1.5 miles–I usually get going about 40 miles an hour. Then, it turns into a gentle gravel descent for another 1.3 miles. Then, you can take a left on Dug Road and enjoy another 2-3 miles of gravel, albeit uphill. A map of this short segment is below, and GPS can be found here. Include this section in your route, I promise you’ll like it.

map

Finally, this is what today’s ride looked like. I’m using an Exposure Diablo here, which I suppose I should review at some point, if for no other reason than to thank them for manufacturing the finest battery light ever made. Believe it or not, this is on low power, which I believe provides 12-14 hours of battery life with an output comparable to that of an Edelux.

14

That’s all for now. I’ll review the SiCCC rotors tomorrow and perhaps post some more images of my shorter rides later this week. I’ll get back to route finding shortly, just have to wait for the wrist to heal a little more.

John

medicalwriter.net

A Sunday Tragedy

Here I sit, on a beautiful Sunday afternoon. Working.

Doug H came out to my place for a planned 80-mile ride over Peekamoose and then to the Neversink Reservoir. Unfortunately, about 5 miles into the ride I had a mechanical that resulted in a crash. Now I’m sitting here nursing a wrist that has swelled up to the size of a tennis ball.

So sad…as you know, I spent the past month traveling, so I’ve only been able to get in a few quick rides. I was looking forward to this ride for the last 5 weeks!

Hopefully the swelling will go down enough that I can do some short 10- to 15- mile rides every day this week, and by next Saturday, it better be gone, because we’ve got a 200k planned.

John

medicalwriter.net